CI Machinery: Taking a Look at the FX100

CI Machinery: Taking a Look at the FX100

To create the water/air proof heat welded seam, Celina uses the FX100 – a ducting creation station made by Miller Weldmaster. A single operator is able to set up and run the FX100, maximizing the efficiency of production when combined with the already stellar features:

Celina Awarded JE-RDAP Contract for CBRNE Research Opportunities

Celina Awarded JE-RDAP Contract for CBRNE Research Opportunities

The Joint Enterprise Research, Development, Acquisition and Production/Procurement (JE-RDAP) program is tasked with supporting the research and development in the field of Chemical, Biological, Radiological, Nuclear, and High-Yield Explosives (CBRNE) items. This includes defense systems, capabilities, equipment, supplies, and general materials that in one way or another are in used in situations that deal with CBRNE circumstances. To fulfill their goal, JE-RDAP occasionally issues contracts for their research efforts.

Proper Parlor Precautions – The Milking Parlor Curtain

Proper Parlor Precautions – The Milking Parlor Curtain

The curtains that section off your milking parlor are going to need to be fashioned a little different than your standard barn curtain – for one, there’s going to be a lot more up and down motion on a regular basis. This and temperature factors make milking parlor curtains no laughing matter.

CI Machinery: the Quilter

CI Machinery: the Quilter

Each quilter takes up a fair amount of space, to be sure. The rear of the apparatus has the spools and holders in order to create the layering that is required. Depending on the product, the arrangement can be changed in order to accommodate multiple layers, partial layers, additional material strips, and so on. All of this is fed into the main sewing unit, equipped with many lines of sewing needles that have their own controls and thread feeds.

Sandwiches and Dual Layers: Insulating Ducting Choices

Sandwiches and Dual Layers: Insulating Ducting Choices

Insulated Ducting is made with wire reinforcement, keeping the duct in shape no matter where it’s installed. Sandwich ducting has this wire added while the duct itself is being fabricated. This puts the wire within the four layer seams, and can still have wear stripping added for extra protection. Duct-in-Duct is made with a standard wire reinforced duct on the inside, and doesn’t need additional wire on the outside.

Ins and Outs – The Use of Fan Covers

Ins and Outs – The Use of Fan Covers

While I’m not advocating for you to add air lock systems to barns (although imagine the super-sci-fi looking farm you would have), it does point out that there are many small ways in which simple additions can have great effects on heating and cooling systems. While it may not seem like much, Fan Covers from Celina Tent can keep out a large amount of chilly air over the coming winter.

A Little Something More: Wear Stripping on Spiral Ducts

A Little Something More: Wear Stripping on Spiral Ducts

 As Celina Industries develops and expands upon our ducting line, we increasingly come to like the idea of wear stripping. And when you get right down to it the reasoning makes sense. Whether we’re looking at keeping the ducting’s shape or designing a construction program to make tubes for high-damage areas, having an additional layer of protection can bring additional years’ worth of life to a duct.

Keeping Your Hay Tarps Grounded

Keeping Your Hay Tarps Grounded

maintaining your hay tarp isn’t as hard as it may seem. There doesn’t need to be a massive amount of hardcore, engineered pulleys and anchors or complicated rope knots to keep your hay tarps intact and in place. Through the already installed hardware, keeping your hay tarps right where you want them is easier than you’d think.

Tunnels Curtains that Last

Tunnels Curtains that Last

The tunnel curtain system allows for precise ventilation through closing off all air entry points except for where the aperture can be controlled, with powerful fans located at the opposite end of the building. With the fans on, the amount of air moving through the building can be adjusted by raising or lowering the tunnel curtain. This changes the size of the opening letting air in.

Fun at the Fair – Without the Flu

Fun at the Fair – Without the Flu

Spreading an infection is easier than you would think. Take a moment to image yourself walking around on a summer fair day. Are you touching your face? Have you wiped sweat from your forehead? Now are you touching fencing, pen walls, have you picked something off of the ground? AND TOUCHING YOUR FACE AGAIN?